Sizes: 6.3 x 22 & 23 / 6.7 × 22.5 & 23.5
HT: 83.5° / 105mm
Concave: 4°
Deck height: 24mm
Wheels: 24mm or 30mm up to 125mm
Material: 6061-T6 alu
Weight: 4lb 9.5oz / 2085g
We designed a clean looking head tube with good material thickness where the welds are. It is slightly lower at 105mm, and has an engraved logo. The deck has a lot of concave which we designed in a way to fit the stance of a scooter rider, rather flat section in the middle and increasing in stages to the sides. There are also grooves on the surface to add traction and give your feet better grip. We also made the deck really low at only 24mm instead of the “industry standard” of 27mm, so you stand closer to the axles. We are the first brand to do super thick 6mm plates towards the wheel. This gives superior support against material stress, and it stiffens your wheel from sideways pressure. The top back corner of the deck is slightly rounded for less stress impacts. The deck ends have a small diameter, and with that comes a nut with smaller outer diameter. We made the steel nut round so there is no weak spots on the deck ends due to thin material where the hex corners are on a standard nut. The nut is long so you will not strip them, ever. The axle is made of 12.9 cromo steel, the strongest alloy available. Also we wanted to make deck ends that do not need a special long allen key or other "creative" tools. So, in combination to balance the weight of the deck better, we made the deck ends of solid aluminum so that the axle and nut head is not too far in. It also gives them a longer life span. And to top it all off, we have anodized the deck instead of using regular powder coated paint. It's slick as butter.
Enjoy.
FREE WORLDWIDE SHIPPING ON ALL PRODUCTS.
Note: import taxes may apply. Buy locally if available, otherwise we are here to serve you well.
Sizes: 6.3 x 22 & 23 / 6.7 × 22.5 & 23.5
HT: 83.5° / 105mm
Concave: 4°
Deck height: 24mm
Wheels: 24mm or 30mm up to 125mm
Material: 6061-T6 alu
Weight: 4lb 9.5oz / 2085g
We designed a clean looking head tube with good material thickness where the welds are. It is slightly lower at 105mm, and has an engraved logo. The deck has a lot of concave which we designed in a way to fit the stance of a scooter rider, rather flat section in the middle and increasing in stages to the sides. There are also grooves on the surface to add traction and give your feet better grip. We also made the deck really low at only 24mm instead of the “industry standard” of 27mm, so you stand closer to the axles. We are the first brand to do super thick 6mm plates towards the wheel. This gives superior support against material stress, and it stiffens your wheel from sideways pressure. The top back corner of the deck is slightly rounded for less stress impacts. The deck ends have a small diameter, and with that comes a nut with smaller outer diameter. We made the steel nut round so there is no weak spots on the deck ends due to thin material where the hex corners are on a standard nut. The nut is long so you will not strip them, ever. The axle is made of 12.9 cromo steel, the strongest alloy available. Also we wanted to make deck ends that do not need a special long allen key or other "creative" tools. So, in combination to balance the weight of the deck better, we made the deck ends of solid aluminum so that the axle and nut head is not too far in. It also gives them a longer life span. And to top it all off, we have anodized the deck instead of using regular powder coated paint. It's slick as butter.
Enjoy.
FREE WORLDWIDE SHIPPING ON ALL PRODUCTS.
Note: import taxes may apply. Buy locally if available, otherwise we are here to serve you well.
